In this article
Medically reviewed by Dr. Nermeen Khazan, BDS, an AHPRA-registered dental practitioner, for clinical accuracy.
A custom night guard usually lasts somewhere between 6 months and 3 years. Where yours lands in that range depends mostly on two things: the material it's made from and how hard you grind. A soft guard worn by a heavy grinder might be finished in six months, while a hard guard worn by a light clencher and looked after properly can comfortably pass the two-year mark.
There's no expiry date stamped on a night guard, so the real question is how to tell when yours has stopped doing its job. This guide covers typical lifespans, what wears guards out faster, the signs it's time for a new one, and how to get more life out of the one you have.
Night Guard Lifespan by Material
As a general guide, with proper care:
- Soft night guards: 6 to 12 months. The flexible material is comfortable and forgiving, but it's also the easiest for teeth to wear through. Heavy grinders often chew grooves into a soft guard within months.
- Hybrid night guards: 1 to 2 years. A Hybrid guard has a soft inner layer for comfort against the teeth and a hard outer surface that takes the grinding. That harder biting surface is what gives it a longer life than a fully soft guard.
- Hard night guards: 2 to 3 years. Rigid material resists wear the best, which is why hard guards are usually suggested for people who grind heavily or have worn through softer guards before.
These figures are averages, not promises. Someone who grinds lightly a few nights a week will get more out of any guard than someone who grinds hard every night. If you're still deciding which material suits you, our soft vs hard night guard comparison goes into more detail.
What Shortens a Night Guard's Life
Grinding is the main source of wear, but plenty of everyday habits speed it up:
- Grinding intensity. The harder and more often you grind, the faster any material wears. This is the single biggest factor and the one you have least control over.
- Heat. Hot water, the dishwasher, a sunny windowsill or a car dashboard in an Australian summer can warp the material. Even slight warping changes how the guard sits on your teeth.
- Harsh cleaning. Abrasive toothpaste scratches the surface, and bleach or alcohol-based mouthwash can break down the material and make it brittle over time.
- Chewing on it. Some people play with their guard using their tongue or teeth during the day or while falling asleep. That extra stress adds up.
- Poor storage. A guard left loose in a bag or on the bedside table is more likely to be stepped on, chewed by a pet, or crushed.
- Changes in your teeth. New fillings, crowns, extractions or tooth movement can mean a guard that was fine stops fitting, even if the material itself is in good shape.
Signs Your Night Guard Needs Replacing
Check your guard every week or two when you clean it. Hold it up to the light and look at the biting surface. These are the signs that it's due for replacement:
- Thinning or deep grooves. Some surface marks are normal. Grooves that are getting deeper, or areas where the material looks noticeably thinner than the rest, mean the guard is close to being worn through.
- Holes or worn-through spots. Once your teeth can touch through the guard, it's no longer protecting those teeth. Replace it.
- Cracks or splits. Even a small crack weakens the whole guard and can develop a sharp edge. Stop wearing it and read our guide on what to do if your night guard is broken or cracked.
- A loose or tight fit. If the guard rocks, falls out overnight, feels tight in new places or leaves your teeth sore in the morning, it may have warped or your teeth may have changed.
- Smell or discolouration that won't clean off. Some yellowing over time is normal. A persistent odour or cloudy, stained patches that remain after a proper deep clean usually mean the surface has broken down enough to hold bacteria.
- Your symptoms are coming back. If morning jaw tightness or headaches that had settled start returning, a worn guard is one possible reason. If they persist after replacing it, see your dentist or GP.
A guard with a hole or crack is worse than it looks. A worn-through area concentrates biting force on fewer teeth, and a split edge can cut your gums or cheek during sleep.
How to Make Your Night Guard Last Longer
Good habits won't make a soft guard last as long as a hard one, but they do help any guard reach the upper end of its range:
- Rinse it in cool water as soon as you take it out, before saliva dries on it.
- Brush it gently with a soft toothbrush and mild liquid soap, not toothpaste.
- Do a weekly soak with a retainer or denture cleaning tablet in cool water.
- Let it air dry before putting it in a ventilated case.
- Keep it away from heat: no hot water, dishwasher, car dashboard or direct sun.
- Keep it in its case whenever it's out of your mouth, and out of reach of pets.
- Bring it to your regular dental check-ups so your dentist can look at the wear pattern.
Our full guide on how to clean a night guard covers daily and weekly routines step by step.
Replacing a Jawology Night Guard
If your Jawology guard has simply worn out from use, replacement night guards are 30% off the original price. Get in touch with the team through our contact page or at help@jawology.com and we'll talk you through whether new impressions or a new scan are needed. If you've had dental work since your last guard was made, new impressions will usually be needed so the replacement fits your teeth as they are now.
If your guard broke from normal use rather than wearing out, that's different. Breaks from normal use within 6 months of receiving your guard are covered under Jawology's remake warranty, so contact the team before ordering a replacement.
Repeatedly wearing through soft guards is also useful information. It usually means a Hybrid or Hard guard would suit you better next time, and it's worth mentioning to your dentist at your next check-up.
Frequently Asked Questions
How often should you replace a night guard?
Typically every 6 to 12 months for a soft guard, 1 to 2 years for a Hybrid guard and 2 to 3 years for a hard guard. Replace it sooner if you see holes, cracks, deep thinning, a change in fit, or a smell that won't clean off.
Is it normal for a night guard to have bite marks?
Yes. Light marks and shallow scuffs on the biting surface are normal and show the guard is taking the wear instead of your teeth. Deep grooves, thin spots or holes mean it's reaching the end of its life.
Why does my night guard smell even after cleaning?
Over time the surface of the material breaks down slightly and can hold bacteria that daily cleaning no longer removes. Try a weekly soak with a cleaning tablet first. If the smell or staining remains after that, it's usually time for a new guard.
Can I keep wearing a night guard with a hole in it?
It's best not to. Once your teeth can meet through the guard, those teeth are no longer protected, and the edges around a hole can become sharp. Replace it as soon as you can.
Stop Grinding. Start Protecting.
Order your custom Jawology night guard from $270, hundreds less than a typical dental clinic. Soft, Hard or Hybrid, with every arch option.
Order Your Night Guard
